Beko CDA 664 F Guía para resolver problemas Pagina 22

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 21
22 | BEKO TECHNOLOGIES GMBH
8.3 Alarm connection details
To enable the alarm facility it is recommended that a suitable cable is brought into the
controller via the rear panel with a grommet. An external power source is required.:
1. Connect the switching pole of an externally powered alarm device to terminals 1 and
2 of alarm DIN connector.
2. With the power removed from the dryer and the alarm lead wired as described in 1
above, remove the cover from the DIN connection marked ‘Alarm’ and connect the
wired DIN connector ensuring the seal and screw are fitted.
Alarm relay rating 3 Amp Max 28 VDC
Alarm connection type Hirschmann GDS 207
industrial standard DIN
connector or equivalent
Vista de pagina 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Comentarios a estos manuales

Sin comentarios