Beko CS 58000 Manual de usuario descargar pdf (Pagina 65)

A

Pari 9: Gas sonvertion

Your cooker can operate both

Natural Gas and LPG. You can

convert by changing the gas

source and the top burner, oven

and grill injectors. The

replacement procedure of the

injectors are explained below.

Call authorized Servire for

gas sonvertion,

Replazement of the

top burner injestor

Take off the burner head

and burner cap before

starting this procedure.

Then:

7. Remove the injector

inside the top burner with

a suitable bit. Later, install

the new injector by covering

the injector threads

with leakage

preventing

material. Flame failure

device

Reduced Tap Flow

I »Ignite the burner that should be adjusted,

turn the knob to the reduced position, pull

and take the knob off.

R» With a screwdriver, make the tap

reduced flow adjustment from the injector

that is on the gas tap (only the head is

visible with the bolt shape).

It is sufficient to tight to screw

completely, in butane/propane gas.

For the natural gas, you should turn the

screw counter-clockwise

once. The normal length of a straight

flame in the reduced position

hould be 6 - 7mm.

If the flame is higher than the desired

position, turn the screw clockwise. If its

smaller to the opposite.

For the last control of the burning of the

cooker, bring the cooker high-flame and

reduced positions and check whether the

flame is on or off.

■I

31

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 71 72

Comentarios a estos manuales

Sin comentarios